KT6 Automatic Fiber Laser Cutting Machine for H-B | RFQ Sourcing Details
Laser Cutting Machines · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Laser Cutting Machines. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The KT6 is an automatic fiber laser cutting machine designed for processing metal tubes and structural profiles, including H-beams, angle steel and channel steel. It uses a gantry structure, continuous-wave solid-state laser technology, water cooling and an automatic electric chuck with self-centering clamping.
Published configurations include laser powers from 1,000 W to 6,000 W, while the detailed configuration table also lists 12 kW and 20 kW options. Listed tube lengths are 6 m and 12 m, with 9 m also appearing in the basic specifications. Available cutting-diameter options are stated as 20–240 mm, 320 mm or 520 mm.
Because these values describe multiple configurations, buyers should obtain a configuration-specific technical schedule before ordering. The motion system is specified for a maximum linkage speed of 140 m/min and acceleration up to 1.5G.
Published positioning and repeat-positioning accuracy values are 0.03 mm and 0.02 mm respectively. Equipment details identify an autofocus cutting head, closed-loop servo motor and driver system, linear rails with rack transmission, and selectable laser sources.
The autofocus head has dual water-cooling circuits and three protective cover glasses. Customization is stated as available. Packaging is described as a marine-export plywood case with stretch film and plastic film for moisture protection;requested packaging variations are also offered.
Procurement questions to confirm: Request the exact laser power, laser-source option, supported profile geometries, tube length and diameter capacity for the quoted machine. Confirm whether bevel cutting, drilling, automatic loading or unloading, nesting software and required auxiliary equipment are included.
Obtain an approved layout drawing because published overall dimensions and weights vary between the basic and detailed specifications.
Also document electrical requirements, assist-gas requirements, acceptance-test materials and thicknesses, installation scope, training location, spare-parts package, service response process, warranty coverage and applicable shipping terms in the purchase contract.
KT6 | Applications and Buyer Notes
KT6 is organized as a sourcing-ready Laser Cutting Machines reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questi
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Laser Cutting MachinesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Chuck
- Automatic self-centering electric chuckBased on visible page data; confirm exact value in the RFQ.
- Model
- KT6Based on visible page data; confirm exact value in the RFQ.
- Packaging
- Marine-export plywood case with stretch film and plastic filmBased on visible page data; confirm exact value in the RFQ.
- Structure
- Gantry typeBased on visible page data; confirm exact value in the RFQ.
- Cooling system
- Water c ingBased on visible page data; confirm exact value in the RFQ.
- Machine weight
- 5,400 kg in the detailed table;basic specifications separaBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 12 Kw 6025 Fiber Laser Cutting Machine For Sheet And TubeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Cutting Machines categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Marking And Engraving categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Sources And Parts categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Welding And Cleaning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Fiber Laser Cutter Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Handheld Laser Welder Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Marking Machine Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1500 3000mm Cnc Sheet Metal Tube Pipe Automatic Fiber Laser Cutting Cutter Machine For Metal Laser CThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1500w 2000w 3000w Cnc Full Automatic Laser Metal Cleaning Machine Laser Cleaning Machine And LaserThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1500w 3000w Cnc Tube Laser Cutting Machine Models 230 360This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
KT6 CNC Fiber Laser Tube and H-Beam Cutting Machine for Steel Structure FabricationRequest Quote
Automatic Fiber Laser Tube Cutting Machine, 1000–6000 W, Up to 12 m Pipe LengthRequest Quote
240 mm Fully Automatic Loading CNC Fiber Laser Tube Cutting MachineRequest Quote
KCL-D Series CNC Fiber Laser Cutting Machine with Automatic Exchange TableRequest Quote
KT6 CNC Fiber Laser Tube and Profile Bevel Cutting MachineRequest Quote
KCL-D Series Single-Table CNC Fiber Laser Cutting Machine for Metal SheetRequest QuoteLaserCuttingSupply related sourcing paths
LaserCuttingSupply procurement phrases
LaserCuttingSupply related product samples
High speed professional 1000w co2 die board laser cutting machine for wood Machine parameters: Model No. BNT-W Power 1 5...
Laser Cutting Machines High-Precision 4015 CNC Laser Cutting Machine for Acrylic and Metal - Laser Cutting Machine and FibeCNC fiber laser cutting machines are commonly used for metal cutting and are essential due to their following advantages...
Laser Cutting Machines Wide Belt Metal Deburring Machine for Laser Cutting Parts - Deburring Machine and Sheet Metal Deburr>Machine Features: 1. For flat metal plate material-RW series is used for deburring, edge rounding, and laser oxide remo...
Laser Cutting Machines Large Scale 500W Fiber Laser Metal Cutting Machine - 2026 Laser Metal Cutting Machine, Fiber Laser CLarge Scale Raycus 500W Fiber Laser Metal Cutting Machine Features: 1.Low cost,laser power consumption only 0.5-1.5kw pe...
Laser Cutting Machines Laser Cutting Machine Metal 1500W Fiber Laser Cutting Machine Stainless Steel Laser Cutting MachineProducts Description Performance. The new closed design, fast exchange of double worktables, cutting while processing, h...
Laser Cutting Machines 8000W Laser Cutting Machine for Carbon Steel, High-Speed 80m/Min - High-Speed Cutting Machine and CaSHEET FIBER LASER CUTTING MACHINE Specification Key Functional Components 1. Machine Tool Main Bed 1) Constructed with p...