Dual-Head Continuous Ink-Jet Printer for Salt Bag | RFQ Sourcing Details

Dual-Head Continuous Ink-Jet Printer for Salt Bag (EC-JET910) Application Fields for continuous inkjet printing The Industrial inkjet printer EC-JET printers provide a means of application of printed information onto a wide range of products.

This information would typically be the date, production codes, consumer information, product or corporate identification,product traceability, and many others. It can be widely used in pharmaceutical, chemical, food, construction materials,tobacco, ceramics, electronics and other industries.

Technical Parameter Printhead MIDI (40u,50u,60u,70u) Nominal character range up to 64 dots Number of line 1~4 lines Max.Message Length Up to 2286 characters Max Speed 6.25m/s for single line 7*5 matrix Conduit 2M or up to 6M Printing height min 0.9mm/printhead pringting height max 15mm/printhead printing characters max per second 2857 Net Weight 40KG How does CIJ works ?

The ECJET INKJET PRINTER Sure. Start print head contains an ink drop-generator with a vibrating drive rod. This creates ultrasonic pressure waves in the inkjet ink, breaking it up into individual droplets. When these droplets fall between a set of electrodes, individual droplets are intermittently charged.

The size of the charge given to each droplet determines how far it will be deflected out of the stream when passing through the deflector plates. This determines its placement on the product.

By placing a collection of these droplets close together, a variety of characters are printed as the product passes the print head. Ink droplets not deflected out of the stream are re-circulated to repeat the process.

This is a highly efficient use of ink jet ink allowing many millions of characters to be printed from a litre of ink Printhead 1)The print head is supplied with ink by the ink system which the print head forms into a continuous stream of ink drops which recycle to the ink system.

When printing is required, drops of ink for printing the message are deflected from the stream out of the print head onto the product, providing a non- . The process is controlled by the electronics module which also stores the messages to be printed. The message is programmed using the keyboard and display.

2)The print head is robustly designed for industrial environments. It is hermetically sealed and is permanently attached to the printer itself by a 2 metre (