BK-6000W-4020 CNC Fiber Laser Cutting Machine for | RFQ Sourcing Details
Laser Cutting Machines · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Laser Cutting Machines. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The BK-6000W-4020 is a CNC fiber laser cutting machine configured around a 6000W rated output and a 4000 × 2000 mm effective cutting range. It is presented as a continuous-wave, water-cooled system for processing metal sheet. The listed cuttable materials are stainless steel, carbon steel, aluminum, and copper.
For motion performance, the supplied parameters state axial workbench positioning accuracy of no more than ±0.03 mm/m, table repeat positioning accuracy of ±0.02 mm, and a maximum positioning speed of 120 m/min. The workbench is rated for a maximum load of at least 1500 kg.
The machine uses a customized CNC cutting system and is listed with a fiber laser source, cutting head, servo drive and motor, dedicated chiller, pneumatic components, proximity switches, precision rack, and reducer. Site planning should account for the stated 60 kVA power-supply capacity, three-phase 380V/50.
Hz input, and recommended stabilized power supply. The stated three-phase voltage stability is ±10%, with an output-voltage adjustment rate below 2%. Compressed air requirements include a recommended 1.0 m³ air tank and 20 bar rated pressure.
Listed auxiliary-gas purity requirements are oxygen at or above 99.995% and nitrogen at or above 99.99%. The overall power protection level is identified as IP54. The supplied information also lists an overall size of 4800 × 2200 × 1800 mm, a package size of 480 × 220 × 180 cm, and a package gross weight of 5500 kg.
Buyers should confirm whether these figures describe the installed machine, its shipping package, or both before preparing foundations, access routes, and unloading equipment. Procurement note: the source information contains conflicting secondary entries for output power, working range, and wavelength.
One section lists 2000W, 3000 × 1500 mm, and 1070 nm, while the model-specific parameter table lists 6000W, 4000 × 2000 mm, and 6000 nm. The order specification should therefore identify the exact BK-6000W-4020 configuration and include a confirmed technical data sheet.
Buyers should also confirm achievable cutting thickness and quality by material and assist gas, included safety enclosure and extraction equipment, installation requirements, commissioning scope, software functions, consumables, spare parts, training, delivery configuration, and the precise coverage and conditions of the stated two-year warranty.
BK-6000W-4020 | Applications and Buyer Notes
BK-6000W-4020 is organized as a sourcing-ready Laser Cutting Machines reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-t
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Laser Cutting MachinesBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- BK-6000W-4020Based on visible page data; confirm exact value in the RFQ.
- Machine type
- CNC fiber laser cutting machineBased on visible page data; confirm exact value in the RFQ.
- Power supply
- Three-phase 380V/50HzBased on visible page data; confirm exact value in the RFQ.
- Cooling system
- Water c ingBased on visible page data; confirm exact value in the RFQ.
- Protection level
- IP54Based on visible page data; confirm exact value in the RFQ.
- Applicable material
- MetalBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 5kw 2kw 3kw Metal Stainless Steel Iron Aluminum Copper Cnc Fiber Laser Cutting Machine 1500 3000mmThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 5kw 3kw 3015 Single Table Fiber Laser Cutting Machine For MetalThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 5kw 3kw 6kw Fiber Table Laser Cutting Machine For Cs Ss Aluminum 5mm 12mm 15mmThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1 5kw Air Cooling Handheld Fiber Laser Welder Gw Laser Weld 1500w Gw Laser Welding Machine Without WThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1610 Double Axis Camera Laser Cutting MachineThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Cutting Machines categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Marking And Engraving categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Fiber Laser Cutter Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Handheld Laser Welder Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Marking Machine Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Sources And Parts categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laser Welding And Cleaning categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path ApplicationThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
CNC Fiber Laser Cutting Machine for Metal Sheet and Tube, 1–6 kWRequest Quote
4020 Fiber Laser Cutting Machine, 3000W or 6000W, for Metal Sheet ProcessingRequest Quote
CNC Fiber Laser Cutting Machine with Gantry Structure and Water CoolingRequest Quote
Heavy Duty Steel Base Frame for Fiber Laser Cutting Machine with Precision Welding and CNC ProcessinRequest QuoteLightweight Aluminum Crossbeam for Fiber Laser Cutting Machine with Precision CNC Processing in HighRequest QuoteCNC Fiber Laser Cutting Machine Structural Frame Assembly Bed Frame with Gantry Beam Manufacturer OERequest QuoteLaserCuttingSupply related sourcing paths
LaserCuttingSupply procurement phrases
LaserCuttingSupply related product samples
High speed professional 1000w co2 die board laser cutting machine for wood Machine parameters: Model No. BNT-W Power 1 5...
Laser Cutting Machines High-Precision 4015 CNC Laser Cutting Machine for Acrylic and Metal - Laser Cutting Machine and FibeCNC fiber laser cutting machines are commonly used for metal cutting and are essential due to their following advantages...
Laser Cutting Machines Wide Belt Metal Deburring Machine for Laser Cutting Parts - Deburring Machine and Sheet Metal Deburr>Machine Features: 1. For flat metal plate material-RW series is used for deburring, edge rounding, and laser oxide remo...
Laser Cutting Machines Large Scale 500W Fiber Laser Metal Cutting Machine - 2026 Laser Metal Cutting Machine, Fiber Laser CLarge Scale Raycus 500W Fiber Laser Metal Cutting Machine Features: 1.Low cost,laser power consumption only 0.5-1.5kw pe...
Laser Cutting Machines Laser Cutting Machine Metal 1500W Fiber Laser Cutting Machine Stainless Steel Laser Cutting MachineProducts Description Performance. The new closed design, fast exchange of double worktables, cutting while processing, h...
Laser Cutting Machines 8000W Laser Cutting Machine for Carbon Steel, High-Speed 80m/Min - High-Speed Cutting Machine and CaSHEET FIBER LASER CUTTING MACHINE Specification Key Functional Components 1. Machine Tool Main Bed 1) Constructed with p...