8axis Plasma Square Tube, Round Tube, Channel and | RFQ Sourcing Details

8. Axis Plasma Tube and H-Beam cutting machine, SDYP-5012 Application: 12000mm/500mm CNC intersecting wire cutting machine is the latest high-efficiency and high-precision p ipe , tube and H-beam automatic cutting equipment.

It is mainly used for cutting various low carbon steel, stainless steel, copper, aluminum and other pipes. .

It can cut the end surface of the round pipe, the intersection of the circular pipe and the plane, and the various round and round pipes, the surface of the round pipe and the spherical surface, the pipe and the curved surface, the H-shaped steel channel steel, the rectangular pipe and the square pipe.

The model is beautiful in appearance, compact in structure, stable in operation and easy to operate. The cutting pipe diameter ranges from 30 to 200 mm and the cutting pipe length ranges from 6m.

The components and feature: The mechanical part of the machine is mainly composed of a work table, a power chuck and a cutting head.

The worktable and the power chuck adopt the overall design and mechanically complete machining, so that the longitudinal guide rail and the shaft of the power chuck are kept parallel, which greatly improves the working precision of the machine.

Two parallel linear guide rails are mounted on the side of the table, and precision racks are mounted between the guide rails. The gears are driven by the drive system on the moving body to realize the longitudinal gear and the rack drive. 4.

The power chuck drives the chuck to rotate through the servo motor and the timing pulley, and the work piece is driven by the chuck to realize the forward and reverse rotation. 5. The cutting head is controlled by a dual servo motor for axial and radial deflection.

The linkage of these motion axes is controlled by the system to achieve the cutting of the intersecting lines of the tubes. 6. The rotating device of the machine adopts two sets of mutually parallel multi-group chuck drives.

When working, it is only necessary to directly hang the pipe to the working platform, and the two sets of chucks are used to automatically set the axis line of the pipe, so that the pipe is loaded and unloaded. Very convenient. 7. The CNC intersecting wire cutting machine is based on a five-axis digital control system.

The linkage of multiple motion axes of the entire machine is controlled by the system. The five axes are defined as: Y-axis: The work p